HOME -> News -> At Least One Automaker Plans to Produce an Opposed-Piston Engine
At Least One Automaker Plans to Produce an Opposed-Piston Engine
[ www.lucky-autoparts.com  2017-3-20 11:36:00 HITs:381 ]

It’s fun to study crazy new engine configurations, and every year or so some inventor turns up at the Society of Automotive Engineers’ annual hoe-down in Detroit with another idea for “a better mousetrap.” One of these ideas has apparently surmounted the incredible odds that face such unconventional concepts and is heading for mass production featuring six opposed pistons sharing three cylinders and spinning two crankshafts that are geared together. We hereby dub this configuration OP-3.

James Atkinson, whose name adorns many of today’s high-efficiency engines, originated his cycle on an opposed-piston engine in 1882, but the idea really gained traction in the ’30s and ’40s, when Hugo Junkers built opposed-piston engines for World War II airplanes. The configuration has been in use ever since in big-engine applications like submarines, freighters, and trains, but it was in 2004 that Achates Power was launched with the goal of bringing the technology to mainstream light vehicles, configured to mount in a mostly vertical position that fits the same envelope as a conventional I-4 or V-6, with the lower crankshaft in the same position as current cranks for easy drop-in vehicle integration. The initial focus has been on light-truck fitments, as they present a bigger challenge and greater potential for total fuel savings.

Motor Trend first discovered the technology at the 2014 SAE show, where we noted that it was heading for production in a stationary power-generation application. About a year later our August Technologue noted that tests and simulations were suggesting that a supercharged, turbocharged 4.9-liter two-stroke diesel Achates OP-3 tuned to produce 275 hp and 811 lb-ft was promising 20 percent better efficiency than Ford’s 6.7-liter PowerStroke turbodiesel V-8. The pace of development picked up in 2015 thanks to a $9 million Department of Energy ARPA-E grant to develop the concept for light duty (another $14.4 million came in to develop military applications of the engine for the Army). Since then Achates has run its OP engines on gasoline and natural gas as well as diesel and JP8, all featuring compression ignition.

During industry days at the 2017 North American International Auto Show, CEO David Johnson announced that by 2018 Achates would produce a drivable prototype truck powered by a 2.7-liter 270-hp, 479-lb-ft supercharged turbodiesel OP-3 engine capable of complying with Tier 3, LEV III, Euro 6 emissions while exceeding 2025 CAFE standards(its projected EPA label values will be 25/32/28 mpg city/highway/combined, yielding a 37-mpg unadjusted CAFE figure when 33 is the requirement for trucks with a footprint of 65-70 square-feet). Johnson further claimed that it would be 30 percent more efficient than the best diesel engines of comparable output, and 50 percent thriftier than the best similar gas engines. But the bigger bombshell was his announcement that of the nine automakers who have signed on as development partners, at least one of them has begun tooling up to build an opposed-piston engine in volume.

Mobil:0086-13248533983 Tel:0086-0574-62936085
COPYRIGHT (C) 2011 ALL RIGHTS RESERVED